Install The Ink Cartridges - Brother MFC-J6910dw Quick Setup Manual

4

Install the ink cartridges

Note
Make sure you install the Starter Ink Cartridges
included with your machine first.
a
Make sure that the power is turned on.
The LCD shows No Ink Cartridge.
b
Open the ink cartridge cover a.
c
Remove the orange protective part a.
Note
Do not throw away the orange protective part.
You will need it if you transport the machine.
d
Lift the scanner cover into the open position.
1
1
e
Store the orange protective part in the holder
inside the machine as shown.
Make sure that the two projections on the
bottom of the orange protective part fit in the
two slots in the holder.
f
Gently close the scanner cover using the finger
holds on each side.
WARNING
Be careful not to trap your fingers under the
scanner cover.
Always use the finger holds provided on each
side of the scanner cover when opening and
closing it.
5