Set The Date And Time; Set Your Station Id - Brother MFC-J6910dw Quick Setup Manual

9

Set the date and time

The machine displays the date and time, and if you
set up the station ID, it will add it to each fax you send.
a
Press MENU.
b
Press a or b to display Initial Setup.
c
Press Initial Setup.
d
Press Date&Time.
e
Enter the last two digits of the year on the
Touchscreen, and then press OK.
(e.g. Enter 1 1 for 2011.)
f
Enter the two digits for the month on the
Touchscreen, and then press OK.
g
Enter the two digits for the day on the
Touchscreen, and then press OK.
h
Press 12h Clock or 24h Clock.
i
Enter the time on the Touchscreen.
(12h Clock only)
Press to cycle AM and PM.
j
Press OK, then Stop/Exit.
10
10

Set your Station ID

You should store your name and fax number to be
printed on all fax pages that you send.
For details, see Entering Text in Appendix C of the
Basic User's Guide.
a
Press MENU.
b
Press a or b to display Initial Setup.
c
Press Initial Setup.
d
Press Station ID.
e
Enter your fax number (up to 20 digits) on the
Touchscreen, and then press OK.
f
Enter your name (up to 20 characters) using
the Touchscreen, and then press OK.
Note
• Press to cycle between letters, numbers
and special characters. (The characters
available may differ depending on your
country.)
• If you need to enter a character that is on the
same button as the character before, press c to
move the cursor to the right.
• If you entered a character incorrectly and want
to change it, press d or c to move the cursor to
the incorrect character, press
g
Press Stop/Exit.
Note
If you make a mistake and want to start again,
press Stop/Exit and go back to a.
.