Disabling Title Edit And Erase (Title Protect); Disabling Dvd Disc Edit And Erase; (Dvd Disc Protect) - Sharp DV-HR400S Operation Manual

Disc Management
94
GB
10
Press ' / " / \ / | to select "END"
and then press SET/ENTER
After input is finished.
• The new title is set, and the screen in
Step 5 is displayed.
11
Press EXIT to quit editing.
• Edit mode will terminate.
Disabling Title Edit and
Erase (TITLE PROTECT)
DVD-RW
HDD
VR MODE
Disables edit and erase so you cannot
mistakenly change or erase the content of a
title.
Lets you safely save a disc for which editing
is in progress.
• This operation will not work with Video
mode discs.
• Titles created with Play List (page 88)
cannot be protected.
Before Starting Editing
• Switch to the drive (HDD or DVD) to
be edited.
1
Select ("REC LIST") in
"START MENU" screen, then
press SET/ENTER.
2
Press ' / " / \ / | to select the
title to protect.
3
Press Blue (D) (FUNCTION
MENU).
4
Press ' / " to select "TITLE
PROTECT SET", then press SET/
ENTER.
5
Press ' / " to select "YES", then
press SET/ENTER.
REC LIST ( HDD: ORIGINAL )
HDD REMAIN: XP
1 PR 1 SP
ARD
1 2 5 / SAT 0 1 : 0 0 0 6 m. SP
CLOCK SETTING
PLAYBACK
ERASE
EDIT
PROTECT THIS TITLE?
HI SP DUB PRIORITY
CHANGE TITLE NAME
TITLE PROTECT SET
YES DISABLE ERASING AND EDITING.
NO ENABLE ERASING AND EDITING.
• The protect mark
protected titles.
(The protect mark can be confirmed
at either the "REC LIST" screen or
"EDIT" screen.)
6
Press EXIT to exit from Edit
mode.
To Cancel Title Protect
1
Select the title protected in Step
2 above, and follow the Steps 3
and 4 above.
2
Select "NO" in the Step 5 above,
then press SET/ENTER.
NOTE
• If "DISC PROTECT" is set for a DVD-RW (VR
mode) disc, protection cannot be cancelled
for individual titles. Cancel "DISC
PROTECT".
3
Press EXIT to exit from Edit
mode.
Disabling DVD Disc Edit
and Erase (DISC
PROTECT)
DVD-RW
VR MODE
Disables editing and erasing of the whole
DVD disc to protect all the contents of it from
being changed or erased mistakenly.
Before Starting Editing
• Switch to DVD.
1
Select
MENU" screen, then press SET/
ENTER.
2
Press ' / " to select "DISC
PROTECT/UNPROTECT", then
press SET/ENTER.
3
Press ' / " to select
"PROTECT", then press SET/
ENTER.
[ FRI ]
2 / 4 7 1 : 0 0 1 4
Press EXIT to exit from Edit
20h00m
mode.
To Cancel Title Protect
1
Follow the Steps 1 and 2 above.
2
Select "NOT PROTECT" in the
is attached to
Step 3 above, then press SET/
ENTER.
("ERASE") in "START