Sharp DV-HR400S Operation Manual page 54

Timer Recording/The GUIDE Plus+
52
GB
®
3
Press Red (A) to display the
S V screen.
HOW IEW
P 00 1-Sep 16:51
Cancel
Please enter the ShowView programming number and
press ENTER to confirm.
=
Search My TV
Record Schedule
1-Sep 16:20 17:00
1-Sep 18:00 19:00
4
Press Number buttons to enter
the S V programming
HOW IEW
number.
P 00 1-Sep 16:46
Cancel Back
Please enter the ShowView programming number and
press ENTER to confirm.
1 5 4 5 2
Search My TV
Record Schedule
1-Sep 16:20 17:00
1-Sep 18:00 19:00
5
Press SET/ENTER to confirm.
• "ERROR" will appear if you have
entered a number that is not a correct
S V number. If this happens
HOW IEW
press ERASE to delete the numbers
as required and enter the correct
S V number.
HOW IEW
• Check that the menu list agrees with
the times shown in the TV listing. If it
does not, press ERASE to return to
the S V system menu, then enter
HOW IEW
the correct S V
HOW IEW
The first time that you use the S
system to make a recording on each channel
preset, "PR" may be highlighted on the On-
Screen Display.
6
Press | to highlight the right
recording tile of the scheduled
event. (Mode, Freq. and Dest.)
Then press Red (A) to select
"Mode" (Rec Mode). With each
press, the selected option shifts
(XP/SP/LP/EP/MN32/MN31/ ...... /
MN1).
System
7
Home
= = = = = = = =
8
Schedule Info
Mode Freq. Dest.
SP Once HDD
ZDF SP Once HDD
RTL LP Once DVD
9
Home
= = = =
10
Schedule Info
Mode Freq. Dest.
SP Once HDD
ZDF SP Once HDD
RTL LP Once DVD
11
NOTE
• During the Timer Standby mode, you cannot
edit or add a timer programme. To edit or
number.
add a timer programme, cancel Timer
Standby mode first.
V
HOW IEW
• VPS/PDC is a signal broadcast by some TV
stations which adjusts the start and stop
time of your Recorder recording. This
ensures that if there is a change in broad-
cast time for your programme the Recorder
will still record the whole programme.
It is essential that the start time as it
appears in the TV listing is used to
programme the Recorder, as this informa-
tion is used to identify the VPS/PDC signal
corresponding to your programme.
• When two consecutive timer recordings are
set, as data is still written to the disc after
first timer recording is stopped, the first
part of the next programme may not be
recorded.
Press Green (B) to select "Fre-
quency". With each press, the
selected option shifts (Once/Daily/
Monday to Friday/Monday to
Saturday/Weekly).
Press Yellow (C) to select
"Destination". With each press,
the selected option toggles (HDD/
DVD).
Press | to proceed to the next
right recording tile ("Timing").
Press Yellow (C) to select
"Timing" (select extra time to add
at the end or select VPS/PDC).
With each press, the selected
option shifts (+0/+10/+20/+30/VPS-
PDC).
• To set this to "VPS-PDC", select
blank.
When you have completed enter-
ing the timer settings, press
GUIDE to exit.
(When you select "D:DVD" in step
8 , ensure the recordable DVD-RW/
R is inserted into the Recorder)
Press TIMER ON/OFF to place
the Recorder in Timer Standby
mode.
• The TIMER indicator on the front of
the Recorder lights up.
• The channel cannot be changed
during Timer Standby mode. To
change the channel, set Timer
Standby to off.