Sharp DV-HR400S Operation Manual page 86

Editing an Original Title (HDD/DVD)
84
GB
• When the start point is set to near the
beginning of a chapter, the beginning
of the chapter will be selected as the
start point. To make the original
designated start point effective, set it
again after combining up with the
chapter just before. (Page 87)
9
Press SET/ENTER when you
reach the end of scene to be
erased.
• The erase end point is set. (The title
will pause.)
• As the erase end point, you can not
select a point which precedes the
erase start point.
• To edit frame by frame, press
F STILL/PAUSE at the erase start
point. Then press
"Frame Advance Playback" or "Frame
Reverse Playback".
• During J FWD or G
| | | | | PLAY and then SET/ENTER.
EDITING (HDD: ORIGINAL)
1 PR 1 SP
ARD
1 2 5 / SAT 0 1 : 0 0 0 6 m.
SP
ERASE SCENE
CHANGE TITLE NAME
CHANGE THUMBNAIL
DIVIDE CHAPTER
YES
n RETURN
• When the end point is set to near the
end of a chapter, the end of the
chapter will be selected as the end
point. To make the original desig-
nated end point effective, set it again
after combining up with the chapter
just after. (Page 87)
10
Press Green (B) (CONFIRMING)
to confirm the contents.
• The title is played back without the
scene to be erased.
• Go to Step 11 .
11
Press \ / | to select "YES", then
press SET/ENTER.
• Erasure begins.
When erasure is completed, the
screen in Step 6 appears.
• If "C (UNDO)" is displayed, you can
undo edit by pressing Yellow (C).
• To quit scene erase, press RETURN.
Then the edit screen appears.
12
Press EXIT to exit from Edit
mode.
Searching for the Start
Point and End Point Scenes
The following playback operations are
available when searching for the start point
and end point scenes.
Playback
• If you press | | | | | PLAY, the currently paused
title will be played back.
Skipping to the start of a chapter
• If the scene to be selected is in another title
or chapter, first search for the title or
chapter using
Searching for scenes in a chapter
•
G
searching for a scene in a chapter.
Pause
or for
• When you reach a scene near the start
point or end point, press
to pause. This will make it easier to find the
REV, press
scene. The start and end points may shift
slightly.
[ FRI ]
2 / 2 7 1 : 0 0 2
Frame Advance/Reverse
HDD REMAIN: XP 20h00m
• If you press
will start Frame Advance Playback. If you
press
1
1 Playback.
00 : 10: 32
0 1
Final selection of scene
• To select a scene more accurately, use
ERASE SCENE?
slow playback starting a little before the
NO
scene to be selected. This will keep you
from going beyond the scene.
If you press
can select a scene at your leisure during
slow playback of the video.
• When you select the start and end points
by using
the actual points may not exactly corre-
spond to the selected points.
K or L .
REV and FWD are convenient for
J
F STILL/PAUSE
L after pause, the video
K , it will start Frame Reverse
SLOW after pausing, you
K , L or SLOW buttons,