Display Information; Channel Information; Checking Remaining Time Of Hdd And Number Of Titles - Sharp DV-HR400S Operation Manual

Display Information

32
GB

Channel Information

When the power is turned on or the channel is
switched, channel information is displayed as follows:
L R
PR 2 ARD NICAM STEREO
1 2 3 4 5
Display automatically
disappears in 5 seconds.
1 Preset channel
2 Channel name
3 NICAM signal reception
4 Stereo/Bilingual (I/II) signal reception
5 Audio output mode display
NOTE
• You can also display the channel informa-
tion by pressing ON SCREEN (under the
cover) during live broadcast. In this case,
the display disappears in one minute.
• The channel information cannot be
displayed by pressing ON SCREEN (under
the cover) during playback and TIME
SHIFT viewing.
• If you press ON SCREEN (under the cover)
while the channel information is displayed,
information on remaining time and number
of titles is displayed (see above right). If
you press ON SCREEN (under the cover)
again, the display will disappear.
Monitor Output when Re-
ceiving a Stereo or Bilingual
Broadcast
When receiving a bilingual broadcast, press
AUDIO (under the cover) to change the audio
output mode to select Monitor Output. See the
table on page 109 for details.
Checking Remaining Time of
HDD and Number of Titles
When the HDD mode indicator is
displayed in the Front Panel Display
(HDD mode)
1
Press ON SCREEN (under the
cover) or HDD.
NOTE
• The channel information cannot be viewed
during playback, Time Shift Viewing,
Chasing Playback, or Simultaneous
Recording.
• When pressed during live
broadcast, the channel information
(see left) is displayed.
• The HDD information screen is
displayed as follows, when pressed
during playback.
2
HD D
OR I G I N AL 1
3
X P REMAIN 19 h10m
1 / 33
4
4 / 6
5
0 0 : 00 : 28
/ 0 0 : 20 : 30
6
TI TL E RE PE AT
7
1 Original title playback/Play List play-
back indicator
2 Mode display
• Playback .................
• Playback stopped ..
• Recording start .......
• Recording stopped
• Recording paused .
• Recording ...............
• Stopped ..................
3 Selected recording mode and the
amount of recording time remaining
(possible recording time).
4 Title number or total number of titles
during recording or playback.
5 Chapter number or total number of
chapters in the indicated title during
recording or playback. (When stopped,
the total number of chapters on the disc
is displayed.)
6 Counter/Total time of the current title
7 Repeat Playback indicator
2
Press ON SCREEN (under the
cover) or HDD again.
• When pressed during playback or
recording, the screen changes to the
counter display.
0 0 : 0 0 : 5 1
/ 0 0 : 2 0 : 0 0
3
Press ON SCREEN (under the
cover) or HDD again.
• Display is turned off.
NOTE
• The HDD information screen (step 1 ) will
automatically disappear in 1 minute.
• The counter display (step 2 ) will not
disappear automatically. Press
ON SCREEN (under the cover) or HDD to
turn it off.
• When you press DISPLAY (under the
cover) while DV is being input, the control
panel is displayed. (DV-HR480S/DV-
HR450S only)
DVD-RW
LIVE
VR ORIGINAL
XP REMAIN 0h10m
1
3
(blue)
REC
(red)
(red)
(red)
LIVE
(blue)
LIVE