Vertical Stripes Appear In The Image; See; Menu" On Page; Image Is Distorted / Image Contains Interference - Epson PowerLite S1 User Manual

When You Suspect a Problem

Vertical stripes appear in the image

• Has the "Trackingg" setting been adjusted?

Image is distorted / Image contains interference

• Have the "Sync.g," "Trackingg" and "Position"
settings been adjusted correctly?
• Are the image signal format settings correct?
• Has the correct resolution been selected?
• Is an extension cable being used?
• Are the cables connected correctly?
Set the tracking value until the vertical stripes disappear. ([Menu] button →
"Image" → "Picture Quality" → "Tracking") See
If the configuration menu "Image" → "Auto Setup" setting has been set to "OFF,"
press the [Auto] button on the remote control to adjust these settings. If the
images have not been correctly adjusted after pressing the [Auto] button and
using the automatic setup function, adjust the settings manually in their
respective menus. ([Menu] button → "Image" → "Picture Quality" → "Sync.") See
"Image menu" on page 36.
• When a computer or Component Videog
appropriate setting for the input source you are using, in the "Image" → "Input
Signal" configuration menu.
• When a Composite Videog or
appropriate setting for the video system you are using in the "Setting" →
"Video Signal" configuration menu.
Set the computer so that the signals that are output are compatible with this
projector. Refer to your computer's documentation for further details. See
"Supported Display Resolutions" on page
If using an extension cable, electrical interference may affect the signals. Confirm
that you are using a shielded cable.

See

"Connecting to a Computer" on page
P.20.
"Image menu" on page
device is connected, select the
S-Videog device is connected, select the
64.
14, "Connecting to Video Equipment"
48
36.