The Mouse Cursor Is Not Displayed On The Computer Screen; When Connecting With Easymp Network Projection The Image Is Not Displayed Or The Image Is Slow To Appear; When A Connection Is Made Using Easymp Network Projection, A Powerpoint Slide Show Cannot Be Started - Epson PowerLite Pro Z8050WNL Network Operation Manual

Troubleshooting

The mouse cursor is not displayed on the computer screen.

Check
Is EPSON Virtual Display installed?
For Windows

When connecting with EasyMP Network Projection the image is not displayed or the image is slow to appear.

Check
Did you try to play back movies with Media Player or try to
operate the screen saver preview?
Is WEP encryption enabled, or are multiple projectors
connected?
Have you enabled DHCP?

When a connection is made using EasyMP Network Projection, a PowerPoint Slide Show cannot be started.

Check
Was EasyMP Network Projection started while PowerPoint
was running?
For Windows
The mouse cursor was moved onto the virtual display
on the Add-Remove EPSON Virtual Display screen, the mouse pointer returns to the screen display
area.
Depending on the computer, the movie playback screen in Media Player may not be displayed, and
the screen saver preview may not be displayed normally.
The display speed decreases when WEP encryption is enabled or multiple projectors are connected.
When DHCP is set to On in Advanced Connection Mode, if an available DHCP server is not found, it
takes time to enter LAN standby status.
When connecting with EasyMP Network Projection, make sure you close PowerPoint first. Slide Show
might not run if connecting while PowerPoint is running.
Remedy
g
. When the virtual display checkbox is cleared
Remedy
Remedy
59