Functions for Enhancing Projection
Advanced Operation
Functions for Enhancing Projection
Adjusting computer generated images
The computer signal is analyzed and the following settings are adjusted to
ensure the optimum image quality.
Trackingg
Position
Sync.g
p
You can set Auto setup to off in the "Image"
configuration menu. (The default is ON) See
When Auto setup is set to off, press the [Auto]
button on the remote control to perform auto
setup.
If you press the [Auto] button during E-Zoom or Freeze operation, or
p
when a configuration menu is being displayed, the display will be halted
and auto setup will take place.
Adjust the Tracking and Sync settings manually if Auto setup cannot be
performed. ([Menu] button → "Image" → "Picture Quality" → "Tracking,"
"Sync.") See
Selecting a color mode
There are five present color modes available for use. Make a selection
appropriate to the conditions in which you are projecting.
• Dynamic
→
"Auto Setup"
• Presentation
"Image menu" on page
36.
• Theatre
• Living Room
•
"Image menu" on page
Images are modulated and made crisper to emphasize brightness.
Brightness is emphasized. For presentations in bright rooms.
Best for watching movies in their natural tones.
Brightness is emphasized. Ideal for playing video games in bright
rooms.
sRGBg
Conforms to the sRGB color standard. If the connected source has an
sRGB mode, set both the projector and the connected source to
sRGB.
36.
29