No Images Appear (Messages Are Displayed 1); No Images Appear (Messages Are Displayed 2) - Epson PowerLite S1 User Manual

When You Suspect a Problem

No images appear (Messages are displayed 1)

• Check the mode which corresponds to the
frequency of the image signals being output from
the computer.
"Not supported"

No images appear (Messages are displayed 2)

• Has external video output been selected on the
computer?
• Is the input source properly selected?
"No signal"
• Are the cables connected properly?
• Is the power for the connected computer or video
source switched on?
Refer to the documentation provided with your computer for details on changing
the resolution and frequency of the image signals being output from the
computer. See "Supported Display Resolutions" on page
When using a notebook or a PC with a built-in monitor, select external video
output on the computer.
See "Notebook connection" on page
Press the [Source] button on the Control panel until the correct input source is
selected. For the remote control, press the [Computer] button or the [S-Video/
Video] button. See "Selecting the Input Source" on page
See "Connecting to a Computer" on page
P.20.
See "Turning on the Projector" on page
64.
14.
28.
14, "Connecting to Video Equipment"
22.
46