Setting Up Your Dvd Player; Video In Jacks - Sharp DV-SL80X Operation Manual

SETTING UP YOUR DVD PLAYER

CAUTION:
• Be sure to turn off the Player and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cable.
• Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because
it may cause electrical interference when you are watching television programmes.
• DTS audio cannot be produced with an analogue connection.
Connecting to a TV or a stereo TV that has COMPONENT VIDEO In jacks
(White)
(Red)
4
To ANALOG
AUDIO OUT jacks
To ANALOG
AUDIO INPUT jacks
AUDIO OUT L Y C / P
R R
COMPONENT
VIDEO OUT
DIGITAL AUDIO OUT
R VIDEO C / P S-VIDEO
OPTICAL COAXIAL B B
OUT OUT
AUDIO cable
(supplied)
(White) (Red)
ANALOG INPUT
L R
To COMPONENT
VIDEO OUT jacks
COMPONENT cable
(commercially available)
To COMPONENT
VIDEO INPUT jacks
TV
VIDEO INPUT
COMPONENT
Y C C
R B
CAUTION:
• Do not connect the Player to a VCR. If you view the
Picture on your TV after making the connections
shown on the right, a picture noise may appear.
Connect the Player to your TV directly.
– 9 –
DVD Player
DVD
Player
VCR
TV
EN