Table of Contents
Advertisement
DVD SETUP
Audio Setting
Choose appropriate settings for best sound reproduction
dependent on your externally connected equipment. These
settings only affect DVD playback.
1
Press SETUP in STOP mode.
2
Press s or B to select
TOM), then press ENTER.
• On screen menu will appear.
3
Press s or B to select
(AUDIO), then ENTER to confirm.
4
Press K or L to select the items
below, then press ENTER.
DRC (Dynamic Range Control) :
• Choose ON to compress the
range of sound volume.
• The default setting is ON.
• DRC function is available only on the discs recorded in
the Dolby Digital format.
DOWN SAMPLING :
• Choose ON to set down sampling to 48kHz.
• Choose OFF when outputting in the original sound.
• The default setting is ON.
• When playing a disc with copyright protection, the
sound will be down sampled at 48kHz even if you set it
to OFF.
• DOWN SAMPLING function is available only on digital
output of a disc recorded in 96kHz, and when the unit
is connected to another source using the digital out
jack.
• DOWN SAMPLING function is available only on the
discs recorded in the Dolby Digital format.
DOLBY DIGITAL :
Set to BITSTREAM when the player is connected to
Dolby Digital Decoder.
(BITSTREAM : Output by Dolby Digital)
(DPCM : Convert the Dolby Digital to PCM)
• The default setting is BITSTREAM.
• You can also adjust the setting from
menu.
DTS :
Set to BITSTREAM when the player is connected to DTS
Decoder.
(BITSTREAM : Output by DTS)
• The default setting is OFF.
• You can also adjust the setting from
menu).
MPEG :
Set to BITSTREAM when the player is connected to MPEG
Decoder.
(BITSTREAM : Output by MPEG)
(DPCM : Convert the MPEG to PCM)
• The default setting is DPCM.
• You can also adjust the setting from
menu.
5
Press SETUP to exit.
(CUS-
QUICK SETUP
PLAYER MENU
ENGLISH
TV ASPECT
4:3 LETTER BOX
DOLBY DIGITAL
BITSTREAM
DTS
OFF
MPEG
DPCM
AUDIO
DRC
ON
DOWN SAMPLING ON
DOLBY DIGITAL
BITSTREAM
DTS
OFF
MPEG
DPCM
(QUICK) setup
(QUICK setup
(QUICK) setup
Parental Control
Parental Control prevents disc being viewed that exceed the
set limit, unless a password is used.
This feature allows you to prevent discs with unsuitable
scenes from being played by your children.
PARENTAL LEVEL
Parental Level allows you to set the rating level of your DVDs.
Playback will stop if the disc's ratings exceed the level you
set.
1
Press SETUP in STOP mode.
2
Press s or B to select
TOM), then press ENTER.
3
Press s or B to select
(PARENTAL), then press ENTER.
4
Enter your four-digit password then press ENTER.
5
Press K or L to select PARENTAL LEVEL, then press
ENTER.
6
Press K or L to select the desired level (ALL to LEVEL1),
then press ENTER.
• The rating levels continue on two menu screens. Press K
or L to move to the next or previous screen to find the
rating level.
7
Press SETUP to exit.
NOTES:
• When doing this for the first time, enter any 4 digits
(except for 4737). This number will be used as the pass-
word from the second time onward.
• To change the password, press K or L to select
CHANGE at step
digit password, then press ENTER.
• With some DVDs, it may be difficult to find if they are
compatible with parental lock. Be sure to check if the
parental lock function operates in the way that you have
set.
• Record the password in case you forget it.
IF YOU FORGET THE PASSWORD
1
Press 4, 7, 3, 7 at step
tion.
• Password will be cleared and parental level will be set
to ALL.
2
Proceed the steps
PARENTAL CONTROL LEVELS
• ALL
All parental lock is cancelled.
• Level 8
DVD software of any grade (adult/general/children) can
be played back.
• Levels 7 to 2
Only DVD software intended for general use and children
can be played back.
• Level 1
Only DVD software intended for children can be played
back, with those intended for adult and general use pro-
hibited.
– 19 –
(CUS-
PARENTAL
PARENTAL LEVEL ALL
5
, then press ENTER. Enter the four-
4
in the PARENTAL LEVEL sec-
4
7
-
again to set parental level.
EN
Advertisement
Table of Contents
