Camera Angle; Changing The On-Screen Display; Marker Setup Screen; Digital Gamma Setting - Sharp DV-SL80X Operation Manual

Dvd video player
Hide thumbs Also See for DV-SL80X:
Table of Contents

Advertisement

PLAYING A DISC

Camera Angle

Some DVDs contain scenes which have been shot simulta-
neously from various angles. You can change the camera
angle when the (
) icon appears on the screen. If the
ANGLE ICON setting is OFF in the Display setting, the (
icon will not appear. (Refer to page 20.)
1
Press ANGLE during playback.
• The selected angle will be displayed on the display bar
at the top of the screen.
2
Press ANGLE repeatedly to select your desired angle.

Changing the On-Screen Display

You can check information about the current disc by pressing
ON SCREEN on the remote control.
1
Press ON SCREEN during play-
back to show current Chapter.
• The elapsed and remaining
playing time of the current
chapter will be displayed.
2
Press ON SCREEN again to show current Title.
• The elapsed and remaining playing time of the current
title will be displayed.
3
Press ON SCREEN again.
• The BIT RATE and the current repeat setting will be
displayed.
• If you are playing a dual layered disc, the layer number
will also be displayed ( L0: Layer 0 is playing. L1: Layer
1 is playing).
If you are playing a DVD-RW with
setting the PLAYLIST, the follow-
ing will also be displayed.
ORG: Playing the ORIGINAL.
PL: Playing the PLAYLIST.
4
Press ON SCREEN the fourth time to remove the display.
1
Press ON SCREEN during playback, the current Track
will be displayed on the TV screen.
• The elapsed and remaining playing time of the current
track will be displayed.
2
Press ON SCREEN again to show current Total Track.
• The elapsed and remaining playing time of the current
total track will be displayed.
3
Press ON SCREEN again to remove the display.
1
Press ON SCREEN during playback of an MP3
or JPEG disc.
• The name of the file currently in play will be displayed.
2
Press ON SCREEN again to show the track number, the
elapsed time (for MP3 only), the repeat status, and the
playback status at the top of the screen.
will be displayed when the repeat play has been
selected.
T- indicates Track repeat
G- indicates Group (folder) repeat
A- indicates All (disc) repeat
3
Press ON SCREEN again to exit.
DVD
Use markers to memorise your favourite places on a disc.
)
DVD
DVD-RW
NOTES:
VR mode
9/49
0:00:00 -0:00:00
DIGITAL GAMMA is a digital image quality enhancement
function that gives a richer image by brightening the darker
and more obscure portions of the image without altering the
brightness of the brighter portions thereby making the entire
image easier to see. Three digital gamma settings are avail-
able to allow for differences in the images played and in
brightness of the room.
1
IIII
T
ORG
2
3
CD
VCD
NOTES:
without PBC function
You can enjoy stereophonic visual space on your existing
stereo system.
MP3
JPEG
NOTES:
– 18 –

Marker Setup Screen

DVD
1
Press MARKER during playback.
• The display screen and Markers will appear on the TV
screen.
2
Press s or B to select a Marker (1 ~ 10), and ensure
that "- : - - : - -" appears in the display.
3
When it reaches the desired point, press ENTER.
• Selected number will turn to
marked.
• The Title or Track and elapsed playing time will appear
in the TV screen.
4
To return to the Marker later, press MARKER during
playback and s or B to choose the desired marker (one
of the
mark), then press ENTER.
• Opening the disc tray or turning off the power or select AC
2
(All Clear) at step
and press ENTER will erase all
Markers.
• To clear a marker, using s or B, position the cursor on
to the marker number to be cleared and press CLEAR.
• You can mark up to 10 points.
5
Press MARKER or RETURN to exit.

Digital Gamma Setting

Press GAMMA during playback.
• The current setting appears.
Press ENTER to switch 1,2,3,OFF.
1,2,3 : Makes the dark parts brighter.
OFF : Shows the original picture as recorded.
Press GAMMA or RETURN to exit.
• The setting will be saved even if the player is turned off.
• This function cannot be used during Rapid Play. (Refer
to page13.)

Virtual Surround

DVD
CD
1
Press MODE repeatedly until the
Virtual Surround screen appears.
2
Press ENTER to set it to 1
(Natural effect), 2 (Emphasized
effect) or OFF.
3
Press MODE or RETURN to exit.
• The setting will be saved even if the player is turned off.
• The setting will not be effective unless the sound mode
is set to STEREO. (for CDs or VCDs only)
• Turn down the level or turn it "OFF" if the sound is dis-
torted.
• This function cannot be used during Rapid Play. (Refer
to page 13.)
CD
DVD-RW
VCD
without PBC function
VR mode
and the point will be
DVD
DVD-RW
VCD
VR mode
1
MP3
DVD-RW
VCD
VR mode
OFF
EN

Advertisement

Table of Contents
loading

Table of Contents