I Setting Up Your Dvd Player; Connecting A Tv Or A Stereo Tv That Has Component Video In Jacks - Sharp DV-SL10 Operation Manual

E57B9QD.QX3 03.5.29 4:26 PM Page 9
SETTING UP YOUR DVD PLAYER
CAUTION:
• Be sure to turn off the Player and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cable.
• Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because it
may cause electrical interference when you are watching television programmes.
• DTS audio cannot be produced with an analogue connection.

Connecting a TV or a stereo TV that has component video in jacks

L Y
(White)
(Red)
DIGITAL R VIDEO
AUDIO OUT
To ANALOG
AUDIOOUT jacks
AUDIO cable
(supplied)
(Red)
To ANALOG
AUDIO INPUT jacks
ANALOG INPUT
C R
COMPONENT
C S-VIDEO
B
VIDEO OUT
To COMPONENT
VIDEO OUT jacks
COMPONENT cable
(commercially available)
To COMPONENT
VIDEO INPUT jacks
TV
(White)
VIDEO INPUT
COMPONENT
R L Y C C
R B
CAUTION:
• Do not connect the Player to a VCR. If you view the
Picture on your TV after making the connections shown
on the right, a picture noise may appear. Connect the
Player to your TV directly.
– 9 –
DVD Player
DVD
Player
VCR
TV
EN