Setting Up Your Dvd Player; Connecting To A Tv Or A Stereo Tv That Has Component Video In Jacks - Sharp DV-S1 Operation Manual

SETTING UP YOUR DVD PLAYER

CAUTION:
• Be sure to turn off the Player and equipment to be connected before connecting.
• Read through the operation manual for the equipment to be connected.
• Be sure that the colours of the jacks and plugs match up when using a VIDEO/AUDIO cables.
• Be sure to keep the Player connection cables separate from the TV antenna cable when you install the Player, because it
may cause electrical interference when you are watching television programs.

Connecting to a TV or a stereo TV that has component video in jacks

AUDIO OUT
DIGITAL R
(Red)
To ANALOG
AUDIOOUT jacks
AUDIO cable
(supplied)
To ANALOG
AUDIO INPUT jacks
VIDEO OUT
COMPONENT
Y C
R
S-VIDEO
L VIDEO C
B
(White)
To COMPONENT
VIDEO OUT jacks
COMPONENT cable
(commercially available)
(Red) (White)
ANALOG INPUT VIDEO INPUT
COMPONENT
R L Y C
R
CAUTION:
• Do not connect the Player to a VCR. If you view the
Picture on your TV after making the connections shown
on the right, a picture noise may appear. Connect the
Player to your TV directly.
– 8 –
DVD Player
To COMPONENT
VIDEO INPUT jacks
TV
C
B
DVD
Player
TV
VCR
EN