Filter Installation - Sharp FU-440E Operation Manual

PREPARATION

FILTER INSTALLATION

To maintain the quality of the filters, they are installed in the main unit within plastic bags.
Be sure to remove the filters from the plastic bags before using the unit.
1
Remove the filters
1
Remove the Front Panel.
Pull the bottom of the Front Panel.
2
Pull out the Filter Frame and remove
the Pre-Filter, Active Carbon Filter and
HEPA Filter.
Pre-Filter
3
Remove the Active Carbon Filter
(black) and HEPA Filter (blue) from the
plastic bags.
Active Carbon Filter
Be sure to remove the power plug from the wall outlet.
Front Panel
Filter Frame
HEPA Filter
Active Carbon Filter
HEPA Filter
Filter Frame
E-6
Pre-Filter