Remote Control Operation - Sharp FU-440E Operation Manual

OPERATION

REMOTE CONTROL OPERATION

POWER ON/OFF Button
• When you press the
POWER ON/OFF Button, a
short beep will sound and
operation will start in AUTO
Mode.
• Unless unplug the power
cord, the operation starts in
the previous mode the unit
was operated in.
• To stop, press the POWER
ON/OFF Button again.
A long beep will sound and
operation will stop.
Auto (Fan Speed) Button
The fan speed switches au-
tomatically depending on the
amount of impurities in the air.
Manual (Fan Speed) Button
The fan speed can be
switched among Silent,
MEDIUM and MAX settings.
QUICK CLEAN Button
See page E-8
LIGHTS ON/OFF Button
Switches the Plasmacluster
Indicator Light and CLEAN-
SIGN Light either ON or OFF.
Plasmacluster Ion Mode Selections
AUTO
When pressed, the unit will switch between Clean
Mode and the Ion Control Mode automatically de-
pending on the amount of impurities in the air as
detected by the dust and odor sensors. Clean
Mode will operate for 1 minute when the Auto func-
tion is selected.
(ION CONTROL)
When pressed, the unit will constantly operate in
Ion Control Mode.
The Plasmacluster Ion Indicator Light is green.
Operations available with
the Remote Control
• AUTO
• MANUAL
• POLLEN
• OFF TIMER
• QUICK CLEAN
• LIGHTS ON/OFF
Plasmacluster Ion mode
selections
Transmitter
Filter Reset Button
When the Washable Active Car-
bon Filter is cleaned and
reinserted into the main unit,
press the Filter Reset Button.
The Filter Indicator light will then
go out with a beep.
Off Timer Button
The set time switches every time
the button is pressed as shown
below.
Plasmacluster
• The indicator light shows the
remaining time.
• The unit will stop operation when
the timer is up.
Pollen Mode Operation
Button
See Page E-8
When pressed, the unit will con-
stantly operate in the Clean Mode,
in which the same numbers of posi-
tive and negative ions are dis-
charged. The Plasmacluster Indica-
tor Light is blue.
OFF
The generation of ions will cease and
the Plasmacluster Indicator Light will
go out.
E-10
• AUTO
• CLEAN
• ION CONTROL
• OFF
4hours
1 hour
Cancel 8 hours
(CLEAN)