Battery Installation; Turning The Power On - Sharp DV-SL1300W Operation Manual

Battery installation

DV-SL1300W
ENGLISH
1 Open the battery cover.
2 Insert the supplied batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them towards the · battery
terminals.
3 Close the cover.
Precautions for battery usage:
I Replace all old batteries with new ones at the same time.
I Do not mix old and new batteries.
I Remove the batteries if the unit is not to be used for long periods of time.
This will prevent potential damage due to battery leakage.
Caution:
I Do not use rechargeable batteries (nickel-cadmium battery, etc.).
I Incorrect installation may cause the unit to malfunction.
Notes concerning usage:
I Replace the batteries if the operating distance is reduced or if the operation
becomes erratic. Purchase 2 "AAA" size batteries (UM-4, R03, HP-16 or
similar).
I Periodically clean the transmitter on the remote control and the sensor on
the unit with a soft cloth.
I Exposing the sensor on the unit to strong light may interfere with operation.
Change the lighting or the direction of the unit.
I Keep the remote control away from moisture, heat, shock, and vibrations.
E-19
DV-SL777 17-24 19

Turning the power on

Test of the remote control
H
Check the remote control operation after making all the connections.
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the power button. Does the power turn on? Now, you can enjoy your
system.
To turn the power on
H
Press the power button:
If the power does not turn on, check the AC power lead is plugged in properly.
2/21/06, 5:06 PM
0.2 m - 6 m
(8" - 20')