Changing The System Setup - Sharp DV-SL1300W Operation Manual

Changing the system setup

Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2",
etc. accordingly.
DV-SL777 17-24 20
1
Press the ON/STANDBY
button on DVD PLAYER to
turn the power on.
I The SHARP startup screen appears.
I If the startup screen is blurred, press
the SETUP button on the remote
control to change the TV system.
2
Press the SETUP button.
3
Press the ∞ or 5 button to
select a Setup menu.
See the list on pages 21 - 24 for setup
menu.
4 Press the 4, 5 , 2 or 3 button
to change the setting and
press the ENTER button after
confirm.
I See the list on pages 21 - 24 for the
selectable parameters.
I Press the ENTER button to complete
setting.
5
Press SETUP button to complete the setting.
I You can complete the setting by select "EXIT SETUP" or press again
SETUP button.
I To change other settings, begin from step 2.
DVD
Notes:
I Settings are stored even if the unit is switch off but it does not include for pass-
word and parental settings.
I The backup function protects the stored settings for a few hours should there be
a power failure or the AC power lead disconnection.
I System setup cannot be perform during playback condition.
2/21/06, 5:06 PM
DV-SL1300W
ENGLISH
NO DISC
E-20