Troubleshooting Chart - Sharp DV-SL1300W Operation Manual

Troubleshooting chart

DV-SL1300W
ENGLISH
Many potential problems can be resolved by the owner without calling a
service technician.
If something is wrong with this product, check the following before calling
your authorised SHARP dealer or service centre.
General
H
Symptom
No sound is heard.
Noise is heard during
playback.
Interference or noise occurs
on the TV image.
The power is not turned on.
No images are displayed.
E-45
DV-SL777 40-52 45
Possible cause
I Is the volume level set to "0"?
I Are the speaker wires disconnected?
I Move the unit away from any computers
or mobile phones.
I Is the unit placed near TV with internal
aerial? Use an external aerial.
I Is the unit unplugged?
I The protection circuit may be activated.
Unplug and plug in the power lead again
after 15 minutes or more.
I Is TV turned on?
I Is the input of TV switched?
DVD player
H
Symptom
Even though a disc has been I Is the disc loaded upside down?
loaded, "NO DISC" is I Is the disc very dirty?
displayed. I Does the disc satisfy the standards?
Playback sounds are skipped. I Is the unit located near excessive
vibrations?
I Has condensation formed inside the
unit?
The control buttons do not I Is the disc very dirty?
function. Music or video I Does the disc satisfy the standards?
playback is interrupted. I Is the unit located near excessive
vibrations?
I Has condensation formed inside the
unit?
Pictures and sound are I Is the disc very dirty?
skipped. I Is the unit located near excessive
vibrations?
I Has condensation formed inside the
unit?
The unit does not operate I Is a disc other than a DVD (region
even if the power is on. number on the back of the unit or ALL),
SVCD, VCD, audio CD, CD-R or CD-RW
loaded?
Image cannot be played back. I Are the video and audio cables
(Sound is not heard.) connected improperly?
I Is a disc other than a DVD (region
number on the back of the unit or ALL),
SVCD, VCD, audio CD, CD-R or CD-RW
loaded?
I Is the disc very dirty?
I Is the disc loaded upside down?
I Clean the optical pickup if it is dirty.
I Is the TV input set to "VIDEO 1/VIDEO
2", etc.?
I Is the unit turned on?
2/21/06, 5:19 PM
Possible cause