Changing The System Setup - Sharp DV-SL1500W Operation Manual

Changing the system setup

Turn on the TV, and switch the input to the "VIDEO 1", "VIDEO 2",
etc. accordingly.
ON/
STANDBY
I / P-SCAN
SETUP
PAL/NTSC
DV-SL800W 17-24 20
1
Press the ON/STANDBY button on
DVD player to turn the power on.
I The SHARP startup screen appears.
I If the startup screen is blurred, press the PAL
/ NTSC button on the remote control
repeatedly to change the TV system
2
Press the SETUP button.
3
Press the ∞ or 5 button to select
a Setup menu.
See the list on pages 21 - 24 for setup
menu.
4 Press the 4, 5 , 2 or 3 button to change the setting and
press the ENTER button after confirm.
I See the list on pages 21 - 24 for the
selectable parameters.
E E
C C
I Press the ENTER button to complete
ENTER
H H
O O
(–) (+)
setting.
5
Press SETUP button to complete the setting.
I You can complete the setting by select "EXIT SETUP" or press again
SETUP button.
I To change other settings, begin from step 2.
DVD
Notes:
I Settings are stored even if the unit is switch off but it does not include for pass-
word and parental settings.
I The backup function protects the stored settings for a few hours should there be
a power failure or the AC power lead disconnection.
I System setup can be perform during playback mode.
1/26/06, 6:24 PM
DV-SL1500W
20