Deleting All Stored Images - Sharp VL-Z700S Operation Manual

Liquid crystal display camcorder
Table of Contents

Advertisement

Deleting All Stored Images

You can delete all stored images on a card
in one operation.
Notes:
• Deleted images cannot be restored. Check
whether or not you want the images before
performing the procedure below.
• If you want to keep some images on the card,
first delete-protect them (see page 81), and
then perform the procedure below.
1
In Card Playback mode, press the
DISPLAY/MODE SET button until the
mode screen appears.
2
Press l or m on the Operation
button to select "DELETE ALL", then
press the centre of the Operation
button.
• The DELETE ALL? indicator appears.
F U L L
P I C . E F F E C T
D E L E T E O N E
D E L E T E A L L
D E L E T E
NO
Y E S
S E L E C T
DELETE ALL? indicator
MULT I
E X E C U T E
1
2
3
4
5
6
A L L ?
1
0
0
-
0
0
0
1
NORMA L
S E T
3
Press l or m to select "YES", then
press the centre of the Operation
button.
• To cancel the setting, select "NO".
4
Press the DISPLAY/MODE SET
button to finish the setting.
Notes:
• The protected images cannot be deleted.
Cancel the protection setting to delete the
image (see page 81).
• If a print order is assigned to delete-
protected images and you perform the
procedure above, the print order will cancel
(the protection setting will not cancel).
• It may take several seconds to delete all
images from the card.
• Do not turn the power off while deleting
images.
83

Advertisement

Table of Contents
loading

This manual is also suitable for:

Viewcamz vl-z700s-t

Table of Contents