Using The Built-In Led Video Light - Sharp VL-Z700S Operation Manual

Useful Features
Camera Recording
Using the Built-in LED
Video Light
Available modes:
Tape Camera, Card Camera
You can use the built-in LED video light to
brighten the scene when natural lighting is
too dim.
Built-in LED video light
Types
OFF: Turn off the LED video light.
AUTO: Turn on/off the LED video light
automatically depending on light
condition.
ON: Turn on the LED video light.
• The example screens shown are for Tape
Camera mode.
1
In Tape Camera or Card Camera
mode, press the DISPLAY/MODE
SET button until the mode screen
appears.
M A NU A L
F O C U S
A U T O F O C U S
B L C / G A I N
2
Press l or m on the Operation
button to select "LED LIGHT", then
press the centre of the Operation
button.
38
3
4
5
To cancel the LED video light
function
Select "OFF" in step 3 above.
Notes:
• Use the LED video light in the range of 1 m to
• Do not look straight at the light as it may
• Using the LED video light will increase power
• When the shutter speed is set to "AUTO", and
S E T E X E C U T E
• The light range is limited. Check the screen
Press l or m to select the desired
LED light setting, then press the
centre of the Operation button.
LE D L I GHT
Press the DISPLAY/MODE SET
button to turn off the mode screen.
• "N" appears when on-screen
indicators are turned on, indicating that
the LED video light function is now
working.
A U T O A U T O
3 0min 3 0min
Adjust the field angle in the range of 1
m to 1.5 m, then begin recording.
1.5 m.
damage your vision.
consumption. Turn off the video light when
you do not use it.
the LED video light is set to "AUTO" or "ON",
the picture may be rough or shadow images
may occur on a moving subject. To prevent
shadow images, set the shutter speed
manually to 1/50 sec. (see page 63).
while recording.
ON
P A U S E P A U S E