Using The Remote Control - Sharp VL-Z700S Operation Manual

Useful Features
Useful Features
Playback
Playback
Using the Remote
Control
Available modes:
All modes
Use the remote control to operate the
camcorder from a distance, such as when
you want to record yourself in a scene, or
when the camcorder is connected to a TV
for use as a VCR.
Activating
• The example screens shown are for Tape
Playback mode.
1
Press the MENU button to display the
menu screen.
2
Press l or m on the Operation
button to select Z, then press the
centre of the Operation button.
3
Press l or m to select "REMOTE",
then press the centre of the Operation
button.
O T H E R S 1
D E F A U L T
R EMO T E
B E E P
L A N G U A G E
R E T U RN
4
Press l or m to select "ON", then
press the centre of the Operation
button.
REMOT E
5
Press the MENU button to turn off the
menu screen.
50
O N
O F F
ON
Operating
Aim the remote control at the remote sensor
of the camcorder, and press the control
buttons to operate.
ZOOM (W/T) buttons
TAPE REC START/STOP button
CARD REC button
STOP button
REW button
Notes:
• Be careful not to expose the remote sensor to
direct sunlight or strong interior lighting, as
this may prevent the remote control from
operating properly.
• Be sure that there are no obstacles between
the remote control and the remote sensor.
Remote sensor
CARD PLAY/MULTI
button
SLOW button
FF button
PLAY/STILL button
Advance/reverse
buttons
Shift buttons
VOLUME +/L
buttons
T/C (Time Code)
button
DATE button