Managing Projectors From A Remote Computer; Opening And Closing Emp Monitor - Epson PowerLite 765c Parts Manual

Managing Projectors from a Remote
Computer
The software included with your projector lets you monitor and
control projector(s) from a remote computer. These features are
intended for use by network administrators.
Use EMP Monitor (Windows only) to see your projectors'
status, switch image sources, and control basic settings.
Use the mail notification function to receive e-mail alerts
about possible problems.
Use a network management utility running SNMP, such as
™
HP OpenView, to manage your facility's equipment from
a pre-existing system.
You can also use NS Connection to register up to 16 projectors
as a group. This allows you to provide quick and easy access to
these projectors from other computers.
Make sure you have installed the EMP Monitor software
(included on the projector's CD-ROM) on the computer you
want to use to monitor your projectors. (See the User's Guide for
instructions.)
Note:
Your computer must be running Microsoft Windows XP, 2000, Me
or 98SE.

Opening and Closing EMP Monitor

To start EMP Monitor, click
Programs > EPSON Projector > EMP Monitor
If you've added the program to the Startup programs folder, it
may already be open. If so, click the icon in the system tray on
the lower-right corner of your screen to display the EMP
Monitor window:
To close EMP Monitor, right-click the program icon shown
above, then select .
Exit
or
Start > Programs All
.
Click here to start EMP Monitor
Epson PowerLite 755c/765c Projector
Registering Projectors in EMP Monitor
Before you can monitor a projector, you have to register it.
Follow these steps:
1. Open EMP Monitor. You see this screen:
Click here
2. Click
Register projector
3. Click
Auto detect
on the network. Or click
projector's name and network address.
Note:
If Auto detect fails to find the projector, your projector may not
be connected or configured correctly for the network.
Any projectors found on the network are listed:
4. Select each projector you want to add by clicking its name
and clicking . When you're done, click
Add
8/05 Epson PowerLite 755c/765c Projector
. You see this screen:
to locate projectors currently operating
Manual registration
Close
Click here
and enter the
Click here
.
19
-