Projecting Wirelessly - Epson PowerLite 765c Parts Manual

Configuring the Network Settings for Macintosh
Your AirPort software is automatically configured to allow your
Macintosh to detect both computer-to-computer (ad hoc) and
access point networks.
Typically you only need to select your projector's ESSID (ad
hoc) or your AirPort network name (access point) on the
Macintosh menu bar. If you're having problems connecting to
the projector, follow these steps:
1. From the Apple pull-down menu, select
and click the
Preferences
Network settings menu.
Select Automatic
Select Network Port
Configurations
then select AirPort
2. Make sure Location is set to
in the Show pull-down menu.
Port Configurations
3. Under Port Configurations, select
4. Click and close the window.
Apply Now
5. Ad hoc mode: Go to step 8.
Access point mode: Start the AirPort Admin utility. Select
your base station, then click
6. On the AirPort tab, make sure your AirPort network name
matches your projector's ESSID. If not, enter the projector's
ESSID in the AirPort Network text box and click
7. If you turned DHCP in your projector's Advanced menu,
click the tab and make sure the
Network
checkbox is selected. If you need to select it, click
addresses
.
Update
System
icon. You see the
Network
and select
Automatic Network
.
AirPort
.
Configure
Update
Distribute IP
Epson PowerLite 755c/765c Projector
8. Click the AirPort icon on the menu bar at the top of the
Macintosh desktop. You see the AirPort status menu:
Check to make sure AirPort is turned on.
9. Select your projector's ESSID (ad hoc) or the name of your
AirPort network (access point).

Projecting Wirelessly

Once you've started EasyMP and set up your projector and
computer in either ad hoc mode or access point mode, follow
the steps below to start NS Connection and project wirelessly.
Note:
You must have installed EMP NS Connection from your projector
CD-ROM. See the User's Guide for installation instructions.
1. Make sure you've inserted the Epson 802.11g/b card in the
projector's card slot (see page 11).
2. Windows: Select
Start menu.
Macintosh OS X: Double-click the
icon in your Applications folder.
The first time you start NS Connection, you see a dialog box
asking you to select your network. Select the name
for your computer's wireless network adapter card and
click .
OK
.
8/05 Epson PowerLite 755c/765c Projector
from the Windows
EMP NS Connection
EMP NS Connection
15
-