Monitoring Your Projectors - Epson PowerLite 765c Parts Manual

Epson PowerLite 755c/765c Projector
You see this screen listing all registered projectors:
Note: To delete a projector from the list, highlight the projector
name, and click .
Delete
5. Click . You see the status of each of your registered
Close
projectors on the main EMP Monitor screen:

Monitoring Your Projectors

The EMP Monitor screen lets you monitor your projectors
using the Status, Video Source, and Error icons shown below.
These let you see which projectors are currently being used,
from which source (or port) they are projecting an image, and if
a problem occurs.
Status icon Video Source icon
Note: To monitor a projector when it's in standby mode (plugged in
but not projecting), you must first select
setting in the projector's Extended menu.
Standby Mode
For detailed status information, select the projector and click
.
View details
20 Epson PowerLite 755c/765c Projector
-
Error icon
as the
Network ON
8/05
The following tables explain the status, video source, and error
icons. (Additional unsupported icons also appear.)
Status icons
(green) Projecting; no problems
(dark) Turned off; no problems
(green) Projecting; problems detected
(dark) Turned off; problems detected
Network error (for example, not connected
to network or power cable disconnected).
You may also see this error if Network OFF
is selected in Standby Mode.
Video source icons
Computer/Component 1
Computer/Component 2
S-Video
Video
EasyMP
Error icons
Lamp replacement notification (the lamp is
nearing the end of its life; see page 23)
High-speed cooling in progress (the
projector is getting too hot but continues to
operate)
Overheating (projection turned off
automatically)
Lamp out or lamp cover open
Fan error
Sensor error
Internal problem