Managing Projectors From A Remote Computer - Epson PowerLite 7850p Product Information Manual

2. Click the button. You see this screen:
Extension
Click here
3. Click
Use IP connect mode
screen:
4. Click . You see this screen:
IP connection
5. Enter the projector's IP address and click
, then click . You see this
OK
.
Search
EPSON PowerLite 7850p Projector
The IP address appears in the Projector list and a
searching icon displays.
Indicates
search in
progress
If the search fails to find a projector with the specified IP
address, the searching icon turns into a question mark. If
this happens, run EasyMP to check the projector's IP
address, then repeat this step.
Note: If you still don't see the projector, make sure the
Internet Connection Firewall is disabled.
6. Click the projector you want to connect to, then click the
button. If more than one projector is listed, you
Connect
can select additional projectors and connect to them at the
same time.
7. If you are prompted for a keyword, enter the four-digit
number displayed on the EasyMP Network screen and click
.
OK
Managing Projectors from a Remote
Computer
The EasyManagement software lets you monitor and control
projector(s) from a remote computer. These features are
intended for use by network administrators.
❏ Use EMP Monitor to see your projectors' status, switch
image sources, and control basic settings.
❏ Use the mail notification function to receive e-mail alerts
about possible problems.
❏ Use a network management utility running SNMP, such as
™
HP OpenView,
a pre-existing system.
Note: A plug-in is available to allow you to manage your
projectors in HP OpenView. Additionally, other SNMP
management utilities may be available in the future. Check with
your dealer or EPSON for availability.
6/03 EPSON PowerLite 7850p Projector
to manage your facility's equipment from
17
-