Projecting Wirelessly - Epson PowerLite 835p Product Information

Make sure
Easy connect mode
If not, use the pointer button on the remote control to
highlight the checkbox next to
press to select it.
Enter
5. Make sure the projector has a unique name, so you can
identify it when connecting to it from your computer.
If you need to rename it, highlight the
box then press . The outline of the text box turns
Enter
yellow to indicate you are in input mode. Press the
pointer button up to select individual letters in
alphabetical order, or down to select letters in reverse order;
then press the pointer button to the right to move to
the next character position. When you're done typing the
new name, press
Enter
Note: If you want to enter a blank space, use the space
character that comes before the capital letter A.
If you want to enter numbers, press the
remote control. The button lights up to indicate that the
numeric keypad mode is active. Press the
to exit numeric keypad mode.
6. If your network card supports an SSID or ESSID name,
highlight the text box, press
ESSID
name. When you're done, press
ESSID is case-sensitive (if you enter the name in uppercase
on the projector, you must type it the same way on the
computer connecting to the projector).
7. If you want to create a password for remote access to the
projector, highlight the
checkbox, press , and enter a password of up to 8
Enter
alphanumeric characters. When you're done, press
8. If you want to set up a security keyword so that only people
who are in the same room as the projector can access it,
turn
Projector keyword
connect to the projector, it displays a randomized four-digit
is selected, as shown above.
Easy connect mode
Projector name
.
button on the
Num
button again
Num
, and enter a
Enter
. Note that the
Enter
Password for WEB control
on. Then when you want to
number or "keyword" on the screen. When prompted by
NS Connection, you must enter the keyword on your
, then computer to connect.
Note: The projector keyword changes each time you turn the
projector off and then on again, or remove and reinsert the
802.11g card. Check the keyword on the EasyMP Network
screen whenever you start EasyMP and enter that keyword on
text
your computer. You can't connect using a previous keyword.
It is recommended that the keyword setting is changed
periodically.
9. When you're done making these settings, highlight the
button at the top of the screen (you can either press the
button on the remote control or use the
to highlight it), then press
again and press
Network Screen.

Projecting Wirelessly

Once you've started EasyMP and set up your projector and
computer in either Ad Hoc mode or Access Point mode,
follow these steps to start NS Connection and project
wirelessly.
1. Make sure you've installed your 802.11g wireless card in
your projector.
2. Windows: Select
menu.
Macintosh OS X: Double-click the
icon in your Applications folder.
3. The first time you start NS Connection, you may see a
dialog box asking you to select your network. Select the IP
address for your computer's network card and click
Note: If you don't see your network adapter's IP address,
allow a minute for it to appear. If your access point or
AirPort base station uses DHCP (Distribute IP addresses
.
Enter
setting is enabled for AirPort), sometimes it takes a minute
for the server to pick up the IP address.
Once you've selected the IP address for your network adapter,
you won't see the Switch network dialog box when you start
10/04
Epson PowerLite 835p
. Highlight the
Enter
to return to the main EasyMP
Enter
from the Start
EMP NS Connection
EMP NS Connection
Epson PowerLite 835p
OK
Esc
pointer button
button
OK
.
OK
13
-