Auxiliary Mode - Sharp AH-A9FEF Operation Manual

AUXILIARY MODE

Use this mode when the remote control is not available.
TO TURN ON
Lift the front panel of the indoor unit and press
the AUX. button on the operation panel.
• The red OPERATION lamp (
will light and the unit will start operating in the
AUTO mode.
• The fan speed and temperature setting are
set to AUTO.
TO TURN OFF
Press the AUX. button on the operation panel
again.
• The red OPERATION lamp (
will turn off.
NOTE:
If the AUX. button is pressed during normal
operation, the unit will turn off.
(AH-A9FEF)
) on the unit
(AH-A12FEF)
) on the unit
15