Displaying The Date And Time Of Recording - Sharp Viewcam VL-WD450S Operation Manual

9
Press d or y to select "2002" (year),
and then press r.
SE T T I NG
10
Press d or y to select "10" (hour),
and then press r.
SE T T I NG
11
Press d or y to select "30" (minute),
and then press e.
• The internal clock now starts operating.
SE T T I NG
12
Press the MENU/DISPLAY button to
turn off the menu screen.
Changing to the 12-hour Time Mode
1
After performing step 11 above, press
d or y (1) to select "12H/24H", and
then press r (2).
CL OCK SE T
D I SPL AY
ARE A
SUMR T I ME
SE T T I NG
1 2H 2 4H
2
Press d or y to select "12H", and
then press e.
1 H 2 4H 2
3
Press the MENU/DISPLAY button to
turn off the menu screen.
Notes:
• The date and time, once set, are internally
recorded even when not displayed on the
screen.
• The menu screen automatically turns off if no
settings are made within 5 minutes.
2. 6 2 0 0 2 .
:
0 0 0
2. 6 2 0 0 2 .
:
1 0 0 0
2. 6 2 0 0 2 .
:
1 0 3 0
2 4H
1 2H
1 2H
Displaying the Date and Time
of Recording
Follow the procedure below to display the date,
or both the date and time, of recording on the
screen. You can display the date and time
during both recording and playback.
• The example screens for this feature are for
TAPE-CAMERA mode.
1
Hold down the Lock button and set the
Power switch to CAMERA or VCR.
2
Press the MENU/DISPLAY button until
the menu screen appears.
3
Select P, then press r on the
Operation button. Select "DISPLAY" (1),
then press r (2).
CL OCK SE T
D I SPL AY
ARE A
SUMR T I ME
SE T T I NG
1 2H 2 4H
4
Press d or y to select "DATE" or
"DATEHTIME", and then press e.
D I SPL AY
5
Press the MENU/DISPLAY button to
turn off the menu screen.
• The date (or the date and time) is
displayed.
5 0min
Notes:
• Before recording, make sure that the date and
time have been correctly set. If they have not
been set, the display will be left blank when
playing back the recording. (The display will also
be left blank for unrecorded or damaged
portions of the tape.)
• In TAPE-VCR or CARD-VCR mode, the current
date and time are displayed when the tape or
SmartMedia card is not being played back.
OF F
DA T E
DA T E + T I ME
DA T E + T I ME
. 2 . 6 2 0 0 2
SP 1 : 0 3 0
16