Demonstration Mode - Sharp Viewcam VL-WD450S Operation Manual

Appendix

Demonstration Mode

You can watch a brief demonstration of the
special camcorder features in Demo mode.
If the demonstration appears on the screen
when you turn on the camcorder for the first
time, cancel the Demo mode to use your
camcorder.
SUPER CAT'S EYE switch
MENU/DISPLAY button
Operation button
Note:
• The demonstration is only displayed in English.
Watching the Demonstration
1
Remove the Mini DV cassette from the
camcorder (see page 12), and set the
SUPER CAT'S EYE switch to OFF.
2
Hold down the Lock button
and set the Power switch to
CAMERA.
3
Press the MENU/DISPLAY button until
the menu screen appears.
91
Power switch
Lock button
MANUAL SE T
MAN. FOCUS
SHU T. SP E ED
E XPOSURE
P I C. E F F E C T
SCE NE MENU
F ADE
QK. RE TURN
D I S
4
Select I, then press r on the
Operation button. Select "DEMO MODE"
(1), then press r (2).
OTHERS
5
Press d or y to select "ON", then
press e.
DEMO MODE
6
Set the Power switch to OFF, then hold
down the Lock button and set the Power
switch to CAMERA.
• The demonstration begins.
Cancelling Demo Mode
1
During the demonstration, press
the MENU/DISPLAY button to
pause the demonstration.
2
Select I, then press r on the
Operation button. Select "DEMO
MODE", then press r.
3
Press d or y to select "OFF", then
press e.
DEMO MODE
4
Press the MENU/DISPLAY button to
turn off the menu screen.
Note:
• The demonstration will pause if you press the
MENU/DISPLAY button. If you leave it for 60
seconds, or turn the power off temporarily and
then set the Power switch to CAMERA, the
demonstration will begin again.
REMOT E
SOUND
T I ME CODE
T C OUT
DEMO MODE OF F
L ANGUAGE
ON
ON
OF F