Selecting The Picture Resolution - Sharp Viewcam VL-WD450S Operation Manual

Selecting the Picture
Resolution
The picture quality of still images recorded on
the SmartMedia card depends on the resolu-
tion setting. Select the appropriate setting to
match the purpose of recording.
Type of resolution settings
NORMAL: Records images with standard
picture quality.
FINE: Records images with higher quality than
in NORMAL mode but with a lower number of
recordable images.
ECONOMY: Allows you to take more shots than
in NORMAL mode but with a lower quality.
Approximate number of recordable
images for each resolution setting
Capacity of Resolution setting
SmartMedia
card NORMAL
8 MB 104
16 MB 211
32 MB 424
64 MB 849
Note:
• The number of recordable images differs
depending on the combination of resolution
settings being used and the images being shot.
FINE ECONOMY
65 195
132 395
265 795
531 1,592
1
In CARD-CAMERA mode, press the
MENU/DISPLAY button until the menu
screen appears.
2
Select Y, then press r on the
Operation button. Select "REC MODE"
(1), then press r (2).
CAMERA SE T
RE C MODE
SNAP E F F.
DG T L ZOOM
3
Press d or y to select the desired
setting, then press e.
RE C MODE
4
Press the MENU/DISPLAY button to
turn off the menu screen.
• The selected resolution setting indicator
is displayed.
NORMAL
Resolution setting indicator
Note:
• The resolution setting indicator is also displayed
in CARD-VCR mode. The resolution setting
indicator displayed during playback is based on
the amount of data for that recorded image.
Since the amount of data differs depending on
factors such as image detail, sometimes the
resolution setting indicator displayed during
playback may not match the resolution setting
used during recording.
NORMAL
F I NE
E CONOMY
NORMAL
1 0 9 0
74