Advertisement
4
t
CAUTION
.
Do not expose the receiver to strong, direct sunlight, which can adversely affect its
operation. In such case, close the curtains to block the sunlight.
Use of a fluorescent lamp with a quick
starter in the same room may interfere with
transmission of the signal.
The unit may be affected by signals emitted from the remote control of a television,
VCR or other equipment used in the same room.
Do not leave the remote control in direct sunlight or near a heater. Also, protect the
unit and remote control from moisture and shock which can discolour or damage
them.
If you will not be using the unit for a long time, remove the batteries from the remote
control.
SET CURRENT CLOCK TIME
1
Press the CLOCK button.
2
Press the TIME ADVANCE or REVERSE
buttons to set the current clock time.
2
Keep pressing each button to fast-forward
or reverse the time display.
Make sure "a.m." or "p.m." is set correct.
3
Press the CLOCK button.
l
The colon (:) blinks to indicate that the
clock is functioning.
Example:
If the current time is 7 o'clock in
the afternoon.
NOTES:
l
The current time cannot be set, when the
timer mode is programmed.
l
At midday/midnight the clock will display
0:OO AM/PM similar to a 24 hour clock.
9
Advertisement
