Advertisement
( REMOTE CONTROL )
6
-0
2 . .
-0 5
-0 6
-0 7
-a 0
-0 9
3 10
%I 11
-0 12
-0 13
-c) 14
-15 0
(:i: TRANSMITTER
Sends the control signal to the unit.
@
DISPLAY (Liquid Crystal Display)
Indicates the operation modes, set temperature,
fan
speed and time. (See p. 7)
@
ON/OFF Button
Press to start or stop the unit.
(4)
THERMO. (Thermostat) Button
. . ,
Used to select the desired room temperature.
@
ONE-HOUR TIMER Button
Used to operate the unit for just one hour or to turn
the unit off after one hour.
@
MODE Button
Used to select the desired
mode: AUTO,
HEAT,
COOL, DRY, or FAN ONLY.
a
AUTO-SWING Button
Press once to make the vertical
adjustment
louvre
move up and down continuously.
Press the button
again to make the louvre stop.
@
FAN Button
Used to select the fan speed mode: AUTO, HIGH,
LOW, or SOFT.
0
9
0
lb
0 11
0 12
0 13
0 14
0 15
SAVE OPERATION Button
Press to select the SAVE MODE and press it again
to cancel.
TIMER SET/CANCEL Button
Used to set or cancel the timer operation
mode.
CLOCK Button
Used to set the current clock time.
TIME ADVANCE Button
Used to set the timer, or the clock. Press to advance
time.
TIME REVERSE Button
Used to set the timer, or the clock. Press to reverse
time.
TIMER ON Button (for setting the timer)
Used to set the time for the unit to switch on. (l-24
hours)
TIMER OFF Button (for setting the timer)
Used to set the time for the unit to switch off. (l-24
hours)
Advertisement
