Advertisement
NOTE:
Before setting the timer, check to see if the current clock time is properly set.
"WAKE UP" FUNCTION (TIMER ON MODE)
Use the "WAKE UP" function to turn the unit on at a programmed
time.
1
2
3
4
Press the TIMER ON
( 0,
1 )
button.
The TIMER ON indicator
will blink; press the TIME
ADVANCE
or REVERSE buttons to set the desired
time. (The time can be set by 10 minutes.)
Point the remote control at the receiver window of
the unit and press the TIMER SET (SET/C) button.
Select the operation you wish to program.
Operation
mode setting +
MODE BUTTON
Fan speed setting -+ FAN BUTTON
Temperature
setting (The temperature
is set auto-
matically in AUTO MODE.) -+ THERM0
BUTTON
l
The yellow TIMER lamp on the unit lights up.
l
An audible
sound indicates
that the unit has re-
ceived the signal.
l
The unit will turn on prior to the time set to allow
the room to reach the desired temperature
by the
programmed
time.
( TO CANCEL TIMER MODE )
Press the TIMER
CANCEL
button
"SET/C".
The yellow TIMER lamp of the unit will go out.
The current clock time will be displayed on the
remote control.
( TO CHANGE TIME SETTING >
First, cancel the TIMER, and then set it again.
TO CHANGE FAN SPEED, MODE, AND/OR THERMOSfIT
SETTING
AFTER SETTING TIMER
Press each button to change the settings as desired.
18
Advertisement
