Advertisement
LOADING BATTERIES
Use two high-quality
size-AAA
(R03)
batteries.
1
Open the remote control cover by sliding
it in the direction
of the arrow.Remove
the cover by pressing
the mark "77
"
and carefully
pulling it in the direction
of
the arrow.
remote control
2
Insert the batteries
in the compartment,
making sure the @ and @ polarities
are
properly aligned.
l
The remote control
automatically
re-
sets when the batteries are loaded.
l
AM 6:00
will appear
on the display
when the batteries are properly loaded.
3
Replace the cover.
NOTES:
l
The battery life is approximately
one year with normal use.
l
When you replace the batteries, always use two new ones of the same type.
l
When the batteries are replaced,AM
6:00 will appear on the display.
l
If the remote control does not operate normally after replacing the batteries, take
off the batteries and replace them again after 20 seconds.
HOW TO USE THE REMOTE CONTROL
Point the remote control towards the
unit's receiver window and press the de-
sired button. A beep will sound when the
unit receives the signal.
l
Make sure no objects, such as a curtain,
are between
the remote control
and the
unit.
l
The remote control operates
from up to 7
meters away.
8
Advertisement
