Connections - Sharp MD-MT270H Operation Manual

Connections

MD-MT270H
ENGLISH
You can record your favourite CDs or tapes to MD.
When recording, it is recommended to use the AC adaptor and also install the battery. Should the power failure occur,
the power source would be automatically switched to the battery.
Supplied
H T
R IG
T
L E F
connection
cable
H T
R IG
L E F T
Red : to right
White : to left
O U T
Separately available
IT A L
D IG
connection cable
O U T
IT A L
D IG AD-M1DC
AD-M2DC
E-7
To connect to a stereo system with "LINE OUT" or
"AUDIO OUT" sockets (analogue connection)
If the audio system has only one pair of sockets, they
are usually for input only and recording via this con-
nection is not possible.
To the DC IN
To the OPTICAL/
5V socket
LINE IN socket
To connect to a stereo system with a "DIGITAL OUT" or
"OPTICAL OUT" socket (digital connection)
When compared with an analogue connection recording, using a digi-
tal connection will give higher quality.
Some audio systems do not have a DIGITAL OUT socket.
Check before connecting.
02/11/7 MD_MT270H_SEEG_E2.fm
To the wall socket
AC
230V,
50/60 Hz