Checking Displays - Sharp MD-MT270H Operation Manual

Checking Displays

MD-MT270H
ENGLISH
! To check the elapsed time and remaining
time of the track
1
During playback, press the MENU/ENTER button.
2
Press the or button repeatedly to select "DIS-
PLAY".
3
Press the MENU/ENTER button.
4
Press the or button.
Each time the or button is
pressed, the display will change
as follows.
Track number
Track name
Elapsed playback time
Remaining playback time
Notes:
" Complete the operation within 7 seconds whilst selecting
the menus.
" If the disc name or the track name was not originally
recorded on the MiniDisc, "NO NAME" will be displayed.
" Elapsed playback time and remaining playback time may
be different from the actual time.
" The selected display will not change even after the disc is
replaced.
E-21
! To check the remaining recording time and
the total playing time
1
Whilst in the stop mode, press the MENU/ENTER but-
ton.
2
Press the or button repeatedly to select "DIS-
PLAY".
3
Press the MENU/ENTER button.
4
Press the or button.
A
Each time the or button is
B
pressed, the display will change
as follows.
Total number of tracks
C
Disc name
Remaining recording time
Total playing time
D
" Remaining recording time varies depending on the set re-
cording mode.
" Remaining recording time will not be displayed with a play-
back only MiniDisc.
02/11/7 MD_MT270H_SEEG_E4.fm
A A
B B
C
D