Error Messages - Sharp MD-MT270H Operation Manual

Error Messages

MD-MT270H
ENGLISH
ERROR MES-
SAGES
" The battery has run down.
BATT EMPTY
" Nothing is recorded.
BLANK MD
(Replace the disc with a recorded disc.)
" You tried to record from a copy prohib-
Can't COPY
ited MiniDisc.
(Record using the analogue cable.)
" You tried to record signals other than
music (such as data).
" A track cannot be edited.
Can't EDIT
(Change the stop position of the track and
then edit it.)
" You tried to play back a track that can-
Can't PLAY
not be played with this equipment.
Can't READ (*) " The disc data cannot be read because
the disc is damaged.
(Reload the Minidisc or replace it with an-
other one.)
" Recording cannot be performed cor-
Can't REC
rectly due to vibration or shock.
E-35
MEANING ERROR MES-
SAGES
Can'tSTAMP
Can'tWRITE
DEFECT!
DISC FULL
Er-MD (**)
HOLD
LOCKED
NO DISC
A number or symbol appears in (*) position.
02/11/7
MEANING
" Stamp function does not work.
(Check the number of tracks.)
" Cannot save the TOC information cor-
rectly to a MiniDisc.
" The disc is scratched.
(If the recorded sound is not right, retry re-
cording or replace the disc with a record-
able one.)
" The disc is out of recording space.
" The microprocessor has reported a
system fault and the unit is out of order.
(To have it repaired, go to the distributor
where you purchased the unit.)
" The unit is in the hold mode.
" You removed a MiniDisc whilst record-
ing or editing.
(Turn off the power before removing the
MiniDisc.)
" A disc has not been loaded.
MD_MT270H_SEEG_E6.fm