Recording - Sharp MD-MT270H Operation Manual

Recording

MD-MT270H
ENGLISH
Before recording
Cancel the hold mode.
The portable MD does not work whilst in the hold mode.
As for the details, see page 13.
1
Press the REC button.
2
Begin playback on the stereo system connected to
this portable MD.
E-9
3
Press the REC LEVEL or button to adjust the
recording level.
Analogue recording (connecting with analogue ca-
ble)
Adjust the recording level
so that the maximum
sound volume from the
source makes the reading
swing somewhere be-
tween -4 dB and 0 dB.
Digital recording (connecting with digital cable)
You can adjust the level in
1 dB increments between
+ 10 dB and - 10 dB.
Once you adjust the recording level, the setting is re-
tained even after the recording stops. (For cancellation
instructions for the digital recording level, see page 30.)
The sound from the earphones dose not change even
the digital recording level is adjusted.
4
Press the PAUSE button on the stereo system to en-
ter the playback pause mode.
Here, you can search for the track to be recorded.
02/11/7 MD_MT270H_SEEG_E3.fm
0 - 30
+ 10 dB
to
- 10 dB