System Connections - Sharp CD-BK143V Operation Manual

System connections

CD-BK143V
TV/monitor (See page 12.)
Right speaker
E-7 ENGLISH
FM aerial
AM loop aerial
Left speaker
To the wall socket
(See page 8.)
„ Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75 OHMS
terminal and position the FM aerial wire in the
direction where the strongest signal can be re-
ceived.
Supplied AM loop aerial:
Connect the AM loop aerial wire to the AM
LOOP socket. Position the AM loop aerial for
optimum reception. Place the AM loop aerial on
a shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause noise pickup.
Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling >
External FM aerial:
Use an external FM aerial if you require better reception. Consult your dealer.
75 ohm
coaxial cable
Note:
When an external FM aerial is used, disconnect the supplied FM aerial wire.
01/8/28 CD-BK143V(X)E1.fm
< Attaching to the wall >
Wall Screws (not supplied)
External
FM aerial