Inserting A Minidisc - Sharp MD-MT170E Operation Manual

Inserting a MiniDisc

When you record on a MiniDisc,
check that the erase prevention
Recordable Recording
tab is set to the "Recordable"
prevented
position.
1
Slide the OPEN lever to release the com-
partment door.
2
Lift it up.
3
Insert a MiniDisc as shown.
4
Close the compartment door.
Notes:


Do not place the MiniDisc under the holder.


If any resistance is felt, do not force the MiniDisc into
the unit, as it may cause damage to the unit. If resist-
ance is felt, remove the MiniDisc and reload it.


The lid cannot be opened if "TOC" is displayed; refer
to the instruction on page 13.
01/10/26 MD-MT170E_2.fm
MD-MT170E
11