Titling A Minidisc - Sharp MD-MT170E Operation Manual

Titling a MiniDisc

Creating disc and track names
Load a MiniDisc to be named. A playback only or record-
ing prevented MiniDisc cannot be edited.
1
<Disc name> <Track name>
Whilst in the stop Whilst in the pause
mode, press the mode, press the
MENU/CHRG button to MENU/CHRG button to
select "EDIT". select "EDIT".
2
Press the ENTER/SYNC button.
3
<Disc name> <Track name>
Press the MENU/CHRG Press the MENU/CHRG
button to select "DISC button to select
NAME". "TRACK NAME".
4
Press the ENTER/SYNC button.
Cursor


The unit will enter the character input mode.


To cancel the operation, press the :OFF/HOLD
button.
5
Press the button repeatedly to select the
type of characters.
(Capital letters) (Lower-case letters) (Numbers and symbols)
The first 3 characters in the group of the selected
characters will be displayed for about 1 second.
6
Press the or button repeatedly to se-
lect the letter.
7
Press the ENTER/SYNC button to enter it.
Position where the next letter will be entered
8
To enter more letters, repeat steps 5 - 7.
9
When the name has been completely en-
tered, press the MENU/CHRG button.


"TOC" will be displayed. To write the updated con-
tents to the MiniDisc, press the :OFF/HOLD but-
ton.


You cannot remove the MiniDisc whilst "TOC" is
displayed. "TOC" will not disappear until the re-
corded contents have been updated.
Note:


Complete the operation within 7 seconds whilst se-
lecting the menus.
01/10/26 MD-MT170E_5.fm
MD-MT170E
29