Sharp MD-MT170E Operation Manual page 23

To start recording from the middle of a
track
You can erase a portion of a track and make a new
recording.
All of the tracks that follow the newly recorded track will
be erased.
1
During playback, press the button at the
point where you want to begin recording.
2
Press the REC button.
To cancel the operation, press the :OFF/HOLD but-
ton.
3
Press the ENTER/SYNC button.
All of the tracks and track names will be erased, fol-
lowing the point where the playback is paused.
4
Press the MENU/CHRG button repeatedly to
select "REC MODE".
5
Press the ENTER/SYNC button.
6
Press the MENU/CHRG button repeatedly to
select the recording mode (step 3, page 20).
7
Press the button.
Recording will start.
Note:
To keep a track after the point you want to make a new
recording, move the track and then make recording after
that point. (See "Editing a Recorded MiniDisc", page 34.)
01/10/26 MD-MT170E_4.fm
MD-MT170E
23