Specifications - Sharp XL-MP2H Operation Manual

Specifications

XL-MP2H
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
General
Power source AC 220 - 240 V, 50/60 Hz
Power Power on: 18 W
consumption Power stand-by: 0.6 W(*)
Dimensions Width: 138 mm (5-7/16")
Height: 212 mm (8-11/32")
Depth: 218 mm (8-19/32")
Weight 2.6 kg (5.6 lbs.)
(*) This power consumption value is obtained when the unit is in the
power stand-by mode.
Amplifier
Output power PMPO: 26 W (total)
MPO: 13 W (6.5 W + 6.5 W) (10% T.H.D.)
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
Output terminals Speakers: 4 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Tuner
Frequency range FM: 87.5 - 108.0 MHz
AM: 522 - 1,620 kHz
32
CD player
Type Compact disc player
Signal readout Non-contact, 3-beam semiconductor laser
pickup
D/A converter 1-bit D/A converter
Frequency 20 - 20,000 Hz
response
Dynamic range 90 dB (1 kHz)
Cassette deck
Frequency 80 - 8,000 Hz (normal tape)
response
Signal/noise ratio 50 dB (recording/playback)
Wow and flutter 0.35% (WRMS)
Speaker
Type 2 way speaker system
Maximum input 10 W
power
Rated input power 5 W
Impedance 4 ohms
Dimensions Width: 135 mm (5-5/16")
Height: 211 mm (8-5/16")
Depth: 180 mm (7-3/32")
Weight 1.5 kg (3.3 lbs.)/each