Listening To The Radio; Fm Stereo Mode Indicator; Fm Stereo Receiving Indicator - Sharp XL-MP2H Operation Manual

Listening to the radio

Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button to select the desired fre-
quency band (FM or AM).
3
Press the TUNING/FOLDER (
the desired station.
Manual tuning:
Press the TUNING/FOLDER ( or
required to tune in the desired station.
Auto tuning:
When the TUNING/FOLDER ( or
more than 0.5 seconds, scanning will start automatically and the
tuner will stop at the first receivable broadcast station.
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING/FOLDER (
button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
" " will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural
and the sound becomes clearer.

FM stereo receiving indicator

FM stereo mode indicator

or ) button to tune into
) button as many times as
) button is pressed for
or )
Note:
This product can receive FM stereo/ FM monaural and AM monaural
MHz
ST
broadcasts. AM stereo broadcasts will not be played in stereo.
XL-MP2H
21