Timer And Sleep Operation - Sharp XL-MP2H Operation Manual

Timer and sleep operation

XL-MP2H
Timer playback
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 12).
If it is not set, you cannot use the timer function.
2 For timer playback, load the disc to be played back.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button for about 2 seconds.
3
Within 10 seconds, press the CLOCK/TIMER button.
4
Press the PRESET (
the CLOCK/TIMER button.
26
or ) button to set hour then press
5
Press the PRESET ( or ) button to set minute and then
press the CLOCK/TIMER button.
6
Switch input with the PRESET (
"TMR-OFF" and then press the CLOCK/TIMER button.
7
Press the PRESET ( or ) button to set hour and then
press the CLOCK/TIMER button.
8
Press the PRESET ( or ) button to set minute and then
press the CLOCK/TIMER button.
MEMORY
TRACK
SLEEP ROCK CLASSIC POPS JAZZ
9
To select the timer playback source, switch input with
PRESET ( or ) button to select "SOURCE".
or ) button to select
FOLDER 1 RANDOM PS PTY I
WMA MP3 CD USB RDS
kHz
MHz
X BASS ST
Continued to the next page