Speaker Connection - Sharp XL-35W Operation Manual

" Aerial connection
Supplied FM aerial:
Connect the FM aerial wire to the FM 75
OHMS socket and position the FM aerial wire
in the direction where the strongest signal
can be received.
Supplied AM loop aerial:
Connect the AM loop aerial to the LOOP
socket. Position the AM loop aerial for opti-
mum reception. Place the AM loop aerial on a
shelf, etc., or attach it to a stand or a wall with
screws (not supplied).
Note:
Placing the aerial on the unit or near the AC power lead may cause
noise pickup. Place the aerial away from the unit for better reception.
Installing the AM loop aerial:
< Assembling > < Attaching to the wall >
Wall
External FM aerial:
Use an external FM aerial if you require better reception. Consult
your dealer.

" Speaker connection

Connect the wire with the white line to the minus (-) terminal and the
black wire to the plus (+) terminal.
Caution:
! Use speakers with an impedance of 4 ohms or more, as lower
impedance speakers can damage the unit.
! Do not mistake the right and the left channels. The right speaker
is the one on the right side when you face the unit.
! Do not let the bare speaker wires touch
each other.
Placing the speaker system:
There is no physical distinction between the right and the left speak-
ers.
Note:
The speaker grilles are not removable.
Screws (not supplied)
External FM aerial
02/11/22
Incorrect
XL_35W_SCA_1.fm
XL-35W
8