Speaker Connection; Ac Power Connection - Sharp XL-MP9H Operation Manual

XL-MP9H
ENGLISH
E-7
Downloaded From Disc-Player.com Sharp Manuals
System connections (continued)

! Speaker connection

Connect the wire with the white line to the minus (-) terminal and the
plain wire to the plus (+) terminal.
Caution:
" Do not let the bare speaker wires touch each
other.
" Use speakers with an impedance of 4 ohms or
more, as lower impedance speakers can damage
the unit.
" Do not mistake the right and the left channels.
The right speaker is the one on the right side
when you face the unit.
" Do not allow any objects to fall into or to be placed
in the bass reflex ducts.

! AC power connection

After checking all the connections have been made correctly, con-
nect the AC power lead to the AC power input socket, then plug the
AC power lead of this unit into the wall socket.
Wall socket
(AC 230 V, 50 Hz)
Notes:
" Unplug the AC power lead from the wall socket if the unit will not
be in use for a prolonged period of time.
" Never use a power lead other than the one supplied. Otherwise,
a malfunction or an accident may occur.
! To turn the power on
Press the ON/STAND-BY button to turn the power on.
Incorrect
After use:
Press the ON/STAND-BY button to enter the power stand-by
mode.
05/5/23 XL-MP9H(H)E1.fm TINSZA058SJZZ